Nearly all of the time, companies would spend a lot of money to buy their forklifts. It is important, therefore to take good care of your machinery to protect your investment into the long run. It is really a great idea to know the procedures that are undertaken during maintaining and taking care of this machine.
By starting up the forklift and listening closely how it works is one of the best ways to tell how good the engine is working. Like for instance, if there are any misses or knocks, the equipment is defective and this must raise some issues. Furthermore listen carefully for any squealing noise which come from the belts because these noises would provide you with a wealth of information.
When doing maintenance, some of the main components you will have to pay attention to comprise the horn, safety warning devices, gauges, the overhead guard and the lights. Any burnt out light bulbs or faulty parts should be replaced as soon as they are noticed. It is also essential to check the wiring.
When the above components have been inspected thoroughly, proceed to the battery compartment to be able to see if the terminals are clean. If the terminals are not clean, be sure to clean them properly. Every battery cell must be checked so as to ensure the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machine and after that change the filters. The transmission filter, fuel filters and the hydraulic filter should be frequently replaced. Before fitting them, be sure to write the date on the new filters by using a permanent marker in order to keep track.
Once the oil change has been completed and new filters have been fitted, visually inspect the drive axle from beneath the machine. Be sure to grease the axle if there is any grease fitting. Check the engine belts for any cracks or frays. If you find any, fix the problem accordingly. After that, inspect every other component of the equipment including the wheels. If any type of concern or fault is detected, be certain to address it immediately in order to make certain the equipment is running at its safest and optimum levels.